MAGNETIC TOOL HOLDERS
Organize hammers, wrenches, screwdrivers and more! Perfect for use in garages, service stations, workshops, commercial kitchens, and even inside trucks and vans.

• Clamshell packaging hangs vertically or horizontally
• 20 lbs. pull per inch
• Black tool holders have durable black powder coating
• 13” and 24” widths

A. Part No. 07561 - 24" Black tool holder with yellow stripe. MSRP $19.95

B. Part No. 07562 - 24" Nickel-plated tool holder with red stripe. MSRP $22.00

C. Part No. 07564 - 13" Nickel-plated tool holder with red stripe. MSRP $16.00

D. Part No. 07563 - 13" Black tool holder with yellow stripe. MSRP $12.50

Each magnetic tool holder has up to 20 lbs. of pull per inch. When mounted, all of these tool holders are held firmly in place by welded tabs, with 1/4” holes for screws, which are more secure and durable than metal clips or rubber strips. Each mounts easily with screws included.

E. Part No. AM-2PR
13" Magnetic tool holder is painted black with yellow stripe. Two 1/4" dia. mounting holes, 10" apart. MSRP $12.50

F. Part No. AM-1PR
24" Tool holder is painted black with yellow stripe. Two 1/4" dia. mounting holes, 16" apart. MSRP $16.95

G. Part No. AMC-24
24" Nickel-plated tool holder with red stripe. Two 1/4" dia. mounting holes, 16" apart. MSRP $22.00

H. Part No. AMC-13
13" Nickel-plated tool holder with red stripe. Two 1/4" dia. mounting holes, 10" apart. MSRP $16.00

I. Part No. AMC-6
4.875" Nickel-plated tool holder with red stripe. Two 1/4" dia. mounting holes, 5.5" apart. MSRP $10.75

Copyright 1998-2008 Master Magnetics, Inc. All rights reserved.
Colorado • California • Florida • Ohio | Your Best Source in the Magnetic Field | Site Map