NEODYMIUM DISC MAGNETS WITH ADHESIVE
1. Magnet to Magnet - Use a North and a South magnet for added strength and “Snap-to” positioning. Magnets match up at same “Snap-to” spot every time.
2. Magnet to Steel Disc - Use a North magnet attracted to a steel disc for cost savings. Strength is slightly less than magnet to magnet. Magnet will attract to steel, but may not match up with same spot every time.
Four Sizes available for use on: Cabinets, Lockers, Doors, Cases, Chests, Displays, Closures and Purses
Neodymium grade 35 nickel plated magnet discs with pre-applied .030 thick acrylic foam adhesive saves assembly time in a variety of applications.
| Part No. | Adhesive Liner marked with |
Dia. (In.) |
Magnet to Magnet Approx. Lbs. Pull |
Magnet to steel Approx. Lbs. Pull |
| FSND2506N | N* |
0.25 |
1.0 |
0.75 |
| FSND2506S | S |
0.25 |
1.0 |
0.75 |
| FSND3706N | N* |
0.375 |
1.8 |
1.5 |
| FSND3706S | S |
0.375 |
1.8 |
1.5 |
| FSND5006N | N* |
0.50 |
2.5 |
2.2 |
| FSND5006S | S |
0.50 |
2.5 |
2.2 |
| FSND7506N | N* |
0.75 |
3.3 |
1.5 |
| FSND7506S | S |
0.75 |
3.3 |
1.5 |
| FSS5006 | Steel
|
0.50 |
Steel Disc
|
|
| FSS7506 | 0.75 |
|||
| All discs are nickel plated, 0.06 thick with 0.03” acrylic foam adhesive tape. NEO-35 discs have magnetic pole printed on adhesive liner. Let acrylic foam adhesive cure for at least 24 hours before use. *For magnet to steel or magnet only applications, please order the North pole-marked magnets - we stock more of these. | ||||
 |
