Mega Saturated Magnetic Strip
60% More Pull Strength from Same Size Magnet Strip!

This special magnetic strip gives display and sign makers more versatility to use the same low-profile magnet with higher magnetic strength. Comes with acrylic adhesive on the non-magnetic side for steadfast attachment to plastics and non-porous surfaces. Perfect for those applications where regular magnetic strip is not quite strong enough.
Description
Pounds Pull per Foot
.060" x .5"
x 100 ft.
10 lbs.
.060" x 1" x
100 ft.
20 lbs.

Four steps to choosing the type of magnetic tape and strip you need in pre-packaged or bulk form:
STEP 1:
Choose a Magnet Thickness and Width

Basic bulk rolls of extruded magnetic strip are uncoated and dark brown on both sides. One side is magnetized (strong side) and the other is not (weak side). Standard roll lengths are 50, 100 and 200 ft. and vary depending on thickness.

  • Standard Thicknesses - .030", .060", .125" All magnet thickness measurements are taken before laminates are applied.
  • Standard Widths - .25" to 3" (see table below

Strength - The most popular thickness of magnetic strip is .060" because it provides a substantial amount of strength for most strip applications. Under ideal test conditions, magnetic strip can be rated in approximate pounds of pull per foot.
Copyright 1998-2010 Master Magnetics, Inc. All rights reserved.
Colorado • California • Florida • Ohio | Your Best Source in the Magnetic Field | Site Map