Home
e-mail
Request Literature

MATERIAL HANDLING MAGNETS

Which magnet is best for your application? Click here for a comparison guide.

Permanent Lift Magnets

Industrial Strength Magnetic Lifts
(non-electric)

For thick, non-flexing steel items. Eliminates the need for slings, clamping devices or chains. One person can use one of these magnets to perform tasks previously requiring two or more people. Ideal for handling steel plates, forgings, die castings and similar items in machine shops and warehouses. Non-marring roller cam release mechanism requires less torque to release parts. No electricity required. Not recommended for lifting sheet metal.

Part No.
Lbs.
Pull
Dimensions in Inches
Weight (Lbs.)
Length
Width
Height
PLM1382
400
6.5
7.125
2.5
12
PLM1383
1,000
9.5
7.125
3.5
28
PLM1384
1,500
13
7.125
2.5
42
M1000
1,000
12.75
5.125
3.625
33
M1037
1,500
13.625
6.312
5.5
26

NOTE: When lifting sheet sizes over four feet by eight feet, use two or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Material less than .375” thick is susceptible to magnetic bleed through, resulting in two sheets being lifted at once. Magnetic sheet fanners can be used to ensure that only one sheet is lifted at a time. Never stand under load being lifted. Always use extra caution. Only use magnetic lifts on thick materials that do not flex or bend. The surfaces of the lift and the load need to be clean and free of chips, oil, slag, dirt, etc. Lifts must be centered on the load. Not recommended for painted or finished coated surfaces.