Keeping your wide format printers busy is a primary key to your success.
From vehicle signs for contractors, realtors and restaurant delivery vehicles, to P.O.P. retail signs, calendars and local sports team schedules, there are an endless amount of items that make printing on magnetic sheeting a very profitable segment of your business.
Some printers are reluctant to take advantage of these opportunities because they feel that the traditional two-step process of printing on a substrate and laminating to the magnet, or printing on unmagnetized material and then magnetizing it, is too time consuming and not an efficient process. Printing direct to magnet avoids these extra steps, saving time and money. With good quality magnetic sheeting, excellent high resolution printing results can be achieved with solvent, eco-solvent, UV and latex ink systems. For aqueous inks, you can get magnetic sheeting already laminated with a paper topcoat for one-step direct to magnet printing
A common reason cited by printers for resistance to printing on magnet is the concern for running magnetic material through their printer. One problem may be if the platen is metal, the smooth and even flow of the magnet being fed into the printer would be restricted. This is easily overcome by covering the platen with styrene, chip board, vinyl or duct tape, or anything to create an air gap between the metal platen and magnet.
Other issues, such as print head height adjustment, ink saturation, or other metal parts of the printer that the magnet will come in contact with, can be answered by your printer manufacturer and referring to the printer’s profiles. “Everything you run through a printer requires a unique set-up for optimal performance and quality, and magnet is no different,” said Ralph Terramagra, Mutoh Eastern Regional Sales Manager. “The platen and post heater on most Mutoh printers are made of aluminum so they will not cause a problem with the magnet. There is a steel piece across the back where the media feeds in that will need to be covered as explained earlier. Basically, if you keep the magnet from sticking to metal it is really not much different than printing on vinyl. That being said, remember it is much thicker so keep your head height in a higher position, and it is also heavier so your print feed will need to be adjusted,” explained Terramagra.
The extra revenue generated by printing on magnet can help pay for your existing printer and will contribute to your ongoing success and growth.