For Indoor Applications Only

Prints with standard inkjet printers and plotters that apply dye or pigment based inks. Works with most desktop printers. Matte white or high gloss photo quality paper

Available in the following formats:

  • 8.5" x 11" or 4" x 6" pre-cut sheets
  • 8.5" x 11" pre-perforated sheets that yield 10 business card size magnets, 2" x 3.5" each (see more information below)
NOTE: Most inkjet printer models manufactured after 1999 appear to work with PrintMagnet™. Master Magnetics, Inc. is not responsible for damage caused by improper product use.

RECOMMENDED PAGE SETUP
Many word processing/desktop publishing programs have templates for various document sizes and layouts. Look for a template for standard size business cards (ten 3.5" x 2" cards on an 8.5" x 11" sheet) with .75" right/left margins and .5" top/bottom margins.

CAUTION: PrintMagnet™ Business Cards may not work with every inkjet printer. Printers that work best keep the paper flat or nearly flat during the entire printing process. We have discovered that if the printer pulls the paper from the front and wraps it around a roller before printing, PrintMagnet™ Business Cards may not work because the cards can separate and jam the printer. Standard PrintMagnet™, however, will work with this type of printer.

Contact one of our Flexible Magnet Specialists for more information or to order: 1.888.293.3534
Copyright 1998-2010 Master Magnetics, Inc. All rights reserved.
Colorado • California • Florida • Ohio | Your Best Source in the Magnetic Field |
Site Map